Showing 31–45 of 70 results
A Colorado flag under a sunset cloud mural, hand painted across skis and snowboards on a hanging Adirondack style porch swing. Roughly 56 inches wide, 28 tall and 36 deep, made to order so no two come out alike. Most people skip the binding cup holders on a swing, for reasons that turn obvious around drink number two.
A grey forest mountain scene hand painted down a single retired snowboard, sitting on a grey stained base. Roughly 60 inches by 18 by 17, with a 300 lb weight capacity. Coffee table in the living room, boot bench in the entryway, depending on the day.
Our signature mountain mural runs the full 62 inch width of this bench, which is the whole reason to paint a range on a bench instead of a chair. Built from repurposed skis on a Douglas Fir base, hand painted in exterior oil. Stands 47 inches tall and 36 deep.
The Colorado flag and a mountain range hand painted across a hanging Adirondack style porch swing, built from real retired skis. Roughly 56 inches wide, 28 tall and 36 deep, made to order in our Manitou Springs shop. Every one comes out a little different, since the skis get a vote.
Our signature Colorado mural runs the full 62 inch width of this bench, which is the whole reason to paint a range on a bench instead of a chair. Built from repurposed skis on a Douglas Fir base and mounted on rocker runners. Stands 57 inches tall, 62 wide and 36 deep.
A Colorado mountain stripe painted along a single retired snowboard, 60 inches long and only 18 inches deep. It works as a coffee table, an entryway boot bench, or a side table parked between two ski chairs outside. 300 lb weight capacity, so go ahead and sit on it.
A Colorado sunset hand painted in exterior oil across the back of this Adirondack bench, built from retired snowboards and skis. 44 inches tall, 36 deep and 60 wide, so there is room for two adults and whoever else wanders over. Built to sit outdoors in the weather year round.
One Colorado sunset carries across all three pieces, hand painted in warm color over the peaks on repurposed snowboards and skis. You get the 60 inch bench plus two matching Adirondack chairs, each 45 inches tall by 36 deep and 36 wide. That is the whole patio handled in one order.
A booth style ski bench with a tall back, built on a Douglas fir frame at roughly 36 inches tall by 48 wide and 22 deep. Order it in the original ski graphics or hand painted in the colors you pick, and we will change the dimensions to fit your spot. Three year warranty, our cost only on repairs after that. Yup.
This stylish bench is made from repurposed skis, ideal for any lover of the slopes. Transform your space into a sporty, yet stylish display. Reminisce good memories with family and friends on this unique piece of Colorado gear! Built with quality in mind, this bench offers both comfort and durability.
Need a bench to fit your space? We can pick boards to match the exact width you need and we will text you photos of the boards available in your chosen width!  Super easy, you pick the boards and we ship it to your door!  We can even change the stain color on the wood to match your decor!
This stylish bench is made from repurposed snowboards, ideal for any lover of the slopes. Transform your space into a sporty, yet stylish display. Built with quality in mind, this bench offers both comfort and durability.
This stylish bench is made from repurposed snowboards and skis, ideal for any lover of the slopes. Transform your space into a sporty, yet stylish display. Reminisce good memories with family and friends on this unique piece of mountain gear! Built with quality in mind, this bench offers both comfort and durability.
A half circle ski bench finished in a redwood stain, curved so everyone sitting on it is actually facing each other. Built on a Douglas fir base and hand painted with exterior oil paints, 72 inches wide by 36 inches deep and 19 inches tall. Ski binding cup holders are worked right into it.
Base price covers the bench painted in one solid color, which is the right canvas for a brand mark. Your logo floats on top as a UV vinyl decal for $295, because a logo needs clean edges and exact color and paint cannot promise either. Aluminum and plastic appliques are available if you want the mark to stand off the board.
This stylish Earth tones. The Bigfoot/Sasquatch Mountain Stroll Snowboard Bench is made from repurposed snowboards and skis, ideal for any lover of the slopes. Transform your space into a sporty, yet stylish display. Reminisce good memories with family and friends on this unique piece of Colorado gear! Built with quality in mind, this bench offers both comfort and durability.
A bench is the piece people underestimate. A chair seats one person having a quiet moment. A bench seats two people having a conversation, which is a different thing entirely, and it is why the bench usually ends up being the most used piece of furniture on the deck.
Every snowboard bench Colorado Ski Chairs builds starts with an actual snowboard, retired off a mountain rather than manufactured for a furniture line, set into a solid wood frame. Ski benches are the same idea with skis. They are handmade to order in Manitou Springs, Colorado, hand painted in exterior oils, and built to sit outside through a Colorado winter and come back fine.
Bears, moose among the aspens, northern lights, Bigfoot, Colorado sunsets. Painted in oils by hand, not printed or applied as a decal.
Retired snowboards and skis, so the graphics and the wear are genuine. No two benches come out the same.
Several designs work as either. Sit on it, or put boots and drinks on it, usually both in the same evening.
The core of the range. Single board and double board versions, hand painted with a mural across the back so the artwork runs the full width. The Moose Among the Aspens and the Colorado Bear Mural benches are the ones people order most, and the Northern Lights version is the one that stops people in the driveway.
Built from retired skis rather than boards, including the low back alpine styles like the Alpine Low Back Retro Ski Bench and the Powder version. Lower profile, a bit more lounge than dining.
The Light Blue Mystic Mountain and Customizable Single Snowboard pieces are built to take weight either way. In practice most people use them as a boot bench in winter and a coffee table the rest of the year.
If you are furnishing a whole space rather than filling a gap, there are matched sets: a Fire Pit Starter Set with two ski chairs and a bench, and larger patio dining sets with a table, bar stools and benches painted as one design.
The Wakeboard Bench is the same build using real wakeboards, for the lake house rather than the cabin. You pick the boards.
Breweries, restaurants, resorts and offices order benches in matched runs, and there is an XXL stained bench that takes a vinyl logo decal for lobbies and event spaces, with aluminum or plastic appliques available instead if you want the mark to read as hardware. See Branded and Office Solutions. Short term rental of a ski lift bench is also available for events.
Yes. Every snowboard bench is built from an actual retired snowboard, which is why the graphics and the wear pattern differ from one bench to the next.
Two comfortably on the standard single and double board benches. The larger patio sets and dining benches seat more, and we can build to a specific length if you have a space to fill.
Yes. Benches are built on solid wood frames and hand painted in exterior oils so they handle sun, snow and rain. There is a three year warranty on everything we make.
Yes. Pick from the painted designs shown, or describe what you want. Our artists paint mountain ranges, wildlife, sunsets, state flags and custom scenes. Tell us the colors you want and the ones you do not.
Yes. Send us the board, drop it off, or we will collect it anywhere in Colorado. See Sentimental for pieces built from your own gear.
Most benches are made to order, typically two to four weeks. Some are ready to ship. Local delivery covers Colorado Springs, Denver, Breckenridge, Vail, Aspen and most of the state, and we ship nationwide to the lower 48.
The short version. Strip the bindings, decide whether the board is the seat or the back, then build a solid wood frame that carries the weight so the board never has to. Drilling a board means going through fiberglass and steel edges, so carbide bits and patience, and every hole gets sealed. Then the frame is hand painted in exterior oils. The long version is what we do here, usually in two to four weeks, and the mural is what turns it from a project into furniture.
Flat or standing upright, somewhere dry and out of direct sun, with a coat of wax on the base and the edges wiped down so they do not rust. Loosen the binding screws if it is going away for years. And the practical answer nobody says out loud: if the board is never going back on snow, a garage rafter is not storage, it is delay. Building it into a bench keeps it in the house where you can see it.
A plain lumber bench from a plan is a hundred to two hundred dollars in materials and an afternoon. A snowboard bench is a different animal, because the board fights back and the hand painted mural is most of the work. Current prices are on each product page in this category, and if you want a specific length, a specific scene or your own board built in, call 303.775.7273 and we will price it properly rather than guess.
Looking for seating for one instead? See Adirondack Ski Chairs. For the chairlift versions see Ski Lifts, and for tables see Tables. Or call 303.775.7273 and describe the space.
No products in the cart.